OEM plastic injection mould for refrigerator and plastic parts
1. The plastic mold is customized for our clients.
How We Qualify Plastic Mould
After enquiry received, our engineers will analyze the drawing or samples and exchange the opinion about the potential difficulty or invisible problem. If needed, we will suggest right solution accordingly to make good plastic products while cutting cost.
Our quotation will be worked out after the initial mould design or products requirements are clear. In another words, both of two parties will understand whether the project is workable and what the right solution is before the price come out.
After order confirmed and the deposit received, our engineer will offer an analysis, in which customers will get the information including gate location, ejector pin location and other design details. For complex products, or large size products, especially those need hot runner, we will adopt mold flow analysis which can predict the potential defective or flaw, by simulating the injection molding processes, as shown in the picture below. In this way, customers will know the product condition before the mould making. Only after design approved, mould making can be started.
During the mould making process, we will apply the precision machines, for example, CNC machining, EDM, wire-cutting, especially, the 2.5 dimension measuring to check the electrode, parts, and products. In this way, we will find out the unexpected mistake in advance. In another words, it allows us to provide the good quality while saving the time and cost.
Our in-house injection department will test the mould by injecting the samples. The final qualified samples will be sent out to customers for approval.